OPERATIONAL MANUAL
D03S THERMAL TRANSFER OVERPRINTER - 33 -
Finish the print that is incomplete
Choose as priority. “Gap”: ensure print gap on TTR;
“Position”: ensure print position on packing film, work
together with “Compensate Position”.
Applying ribbon save mode. “Normal”-No save; “R Type”-
print narrow contents on wide ribbon, ribbon can be used for
several times (work together with “Times of repeated
printing in R type” & “R type transverse offset distance”;
“Compress”- achieved by “Percentage of Compression” to
get normal prints on packing film; “Precise”-make prints on
packing film more clear.
NORMAL/ R-TYPE/
COMPRESS/ PRECISE
Times of repeated
printing in R type
Vertical position keeps same while changing horizontal print
position (works only in R-type ribbon save mode)
Choose “Automatic Material Handling” mode when packing
machine on/ off frequently.
Normal/ Automatic
Material Handling
Print direction. “Left Hand”- Face the printer, print head in
the bottom, print cable is on the left side of print head;
“Right Hand”- Opposite.
Can be 2 numbers or
alphabet letters
Rotate print contents or mirror
To Next Page
Loading...