Dikai DK-D03S - CHOOSE PRINTHEAD TYPE

OPERATIONAL MANUAL
D03S THERMAL TRANSFER OVERPRINTER - 55 -
4.6.12 Choose the type of Printhead
3. Choose the right type of print head according
to the machine type.
PS: D03S can only support the type of printhead as“32”, other type is Unsupported.
4. Press the return button to go back the main
page after choosing right type of printhead.
1. Enter the “Advanced Settings” when machine is in
IDLE. Find Page 3 in “Engineers Advanced Settings”
3. Press the “Type of Printhead” in Page 3
32
53