3590EKR, 3590EXP, 3590EXT, 3590 EBOX, CPWE, CPWET series indicator E-AF03_05.01_14.07_EN_T.doc
<< F.ModE >> SCALE FUNCTIONING
<< En.kEyS >> KEYS ENABLING
It is possible to enable/disable each single key of the keyboard:
- select the desired key with F6/F7:
- press ENTER to modify the setting:
- Press F6/F7 to select “ENABLED” or “DISABLED” and ENTER to confirm.
QUICK FUNCTION RECALL THROUGH 999 + 123 + Fn
If the function 123 + Fn is not enabled, is possible directly recall the desired function with the keys combination 999 +
123 + Fn in weighing phase.
NOTES:
- It’s possible to enable/disable all the keys together, by selecting “ENABLE ALL” or “DISABLE ALL” (the
confirmation will be requested with the message “SURE?”).
- The disabling of the keys will have effect only the WEIGHING PHASE, in other words, not inside the menus,
databases, etc…
- The turning off of the instrument (long pressing of the C key) will always be enabled.
- The disabling of the keys will be applied also on the PC keyboard, if connected.
(!) ENABLE ALL
To Next Page
Loading...
Need help?
General
