3590EKR, 3590EXP, 3590EXT, 3590 EBOX, CPWE, CPWET series indicator E-AF03_05.01_14.07_EN_T.doc
Preamble function
It is possible to associate also a preamble (numeric value) to the F1, F2…F10 keys. In this way, when the key is
pressed, the preamble is automatically used as parameter of the function to be executed.
The functions to which can be associated a preamble are:
By pressing a key with the function of an associated database (for example articles database) and the
preamble is enabled to the value 9999, it is required disable the eventually enabled record.
EXAMPLE:
9999 + F1(article database), deselect active article.
- press F2 to insert the preamble:
- select enable and confirm with ENTER
- insert the desired value through the numeric keyboard and confirm with ENTER (by confirming the value 0, the
preamble is disabled).
- If one sets the value 9999 as preamble of a key matched to a database function, by pressing the key the active
record is deselected
KEYS’ FUNCTIONS IN THIS STEP
scrolls backward inside the list of the keys.
scrolls forward inside the list of the keys.
F1 performs the default of the function pairing of the keys.
F2 inserts the preamble.
ENTER modifies the code of the function in the current key; while entering it confirms the enteredcode.
NOTE: by pressing the . /HELP key, it’s possible to display the list of the keys used inside this step and their functions.
The list is automatically shown. If one wants to scroll the list of the keys in manual mode, it is possible to use the arrow
keys (F6 and F7 ).
To Next Page
Loading...
Need help?
General
