Dionex UltiMate 3000 - Automated Control by Chromeleon; General

UltiMate 3000 Nano and Cap - System Installation and Application
43
No. Description Part No.
1
Nano/Nano
HPLC
Capillary/Capillary
HPLC
Monolith./Monolith.
HPLC
17 Capillary from analytical pump 2 (DGP-3600, right pump) to FLM-3300 flow splitter
Long connection (system with detector)
Short connection (system without detector)
6035.2556
2
(standard) or 6037.2556 (biocompatible)
6035.2554
2
(standard) or 6037.2554 (biocompatible)
18 FLM-3300: Capillary from flow splitter to switching valve
Standard
Biocompatible
6720.0033
2
6721.0033
2
6720.0034
2
6721.0034
2
6720.0034
2
6721.0034
2
19 Separation column (The column is connected directly to the switching valve.) 160321
2
160295
2
16409
2
20 Connection of separation column (FLM-3300) to right switching valve (FLM-3200) The separation columns have an inbuilt fused silica outlet (for direct
connection to the switching valve).
21 Sample loop (20 µl) 6820.0018
2
(standard) or 6821.0018
2
(biocompatible)
22 Standard needle (2.4 µl, fused silica) 6820.3010 (standard) or 6821.3010 (biocompatible)
1
The part number refers to the packing unit. For more information, contact your Dionex Sales Representative.
2
These parts are included in the Parallel LC Kit for the related application (→ section 8.6, page 66).