Directed Electronics 2102T User Manual

6
© 2012 Directed� All rights reserved�
Installation Type Selection
Choosing the right installation type according to the device you install.
Corresponding installation type according to what device you are installing Page
Type 1 - PKE Standalone
page 7
Type 2a - PKE + Xpresskit Bypass + AutoStart or AstroStart or Viper/Python/Clifford Directed
Remote Starter (with 4-pin antenna connector)
page 8
Type 2b - PKE + Xpresskit Bypass + Viper/Python/Clifford Directed Remote Starter (with 6-pin
antenna connector)
page 9
Type 3a - PKE + Xpresskit Bypass + DIRECTED SmartStart + Autostart or Astrostart Directed Remote
Starter (with 4-pin antenna connector)
page 10
Type 3b - PKE + Xpresskit Bypass + DIRECTED SmartStart + Viper/Python/Clifford Directed Remote
Starter (with 6-pin antenna connector)
page 11
Type 3c - PKE + Xpresskit Bypass + DIRECTED SmartStart + Viper/Python/Clifford Directed Remote
Starter (with 4-pin antenna connector)
page 12
Type 4 - PKE + 4x10/5x10 page 13
Type 5 - PKE + Xpresskit Bypass page 14
Type 6 - PKE + DIRECTED SmartStart + 4x10/5x10 page 15
Type 7 - PKE + Xpresskit Bypass - Remote Start Ready (RSR) + DIRECTED SmartStart page 16
Type 8 - PKE + Xpresskit Bypass - Range Extender (RXT) + XL202 page 17
Type 9 - PKE + AutoStart or AstroStart or Viper/Python/Clifford Directed Remote Starter (with 4pin
antenna connector)
page 18

Directed Electronics 2102T Specifications

General

Brand	Directed Electronics
Model	2102T
Category	Car Alarm
Language	English