EasyManua.ls Logo

Directed DIRECTWIRE DIRECTECHS 933.TL14 - User Manual

Directed DIRECTWIRE DIRECTECHS 933.TL14
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS3+ / DS4+
933.TL14
v1.02.198.9
2023 Toyota Camry
THTON7 Compatible
(Sold Separately)

Questions and Answers

  • D
    dunlapjohnSep 12, 2025
    What to do if my Directed Remote Starter says bypass data not detected?
    • M
      Melissa WrightSep 12, 2025
      If your Directed Remote Starter indicates that bypass data is not detected, check the bypass line connection. If you're using multiple wires, make sure they aren't inverted. Also, ensure that the vehicle still operates correctly using the factory key.
  • J
    Jeremy PatrickSep 8, 2025
    Why speed was detected on Directed Control Unit?
    • B
      Bradley BlakeSep 8, 2025
      The vehicle was detected as moving, which prevents the system from shutting it down.
  • L
    Linda CollierSep 22, 2025
    Why is the CAN bus incorrectly detected in my Directed Remote Starter?
    • K
      kennethparksSep 22, 2025
      Verify the CAN1 and CAN2 connections.
  • J
    Jason DorseyAug 29, 2025
    What to do if Directed Automobile Accessories ISO 1 not detected?
    • C
      Clinton SnyderAug 29, 2025
      If the Yellow/Black wire did not detect the expected signal, refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
  • D
    Daniel PeckAug 28, 2025
    What does it mean if Directed DIRECTWIRE DIRECTECHS 933.TL14 Automobile Accessories PTS shutdown error?
    • F
      frobinsonAug 29, 2025
      The PTS output from the module was not activated due to safety protection.
  • D
    Dawn PopeAug 28, 2025
    Why is Directed Automobile Accessories showing 'Speed was detected'?
    • A
      Anthony HallAug 28, 2025
      The vehicle was detected as moving, which prevents the system from shutting it down.
  • N
    natasha14Aug 28, 2025
    What to do if Directed DIRECTWIRE DIRECTECHS 933.TL14 transponder functions were skipped?
    • C
      Cassie LiAug 28, 2025
      If compatible and when RXT mode is not desired or convenience features are needed, reset and reprogram the module.
  • J
    Jennifer ParkerSep 8, 2025
    Why brake was not detected on Directed Control Unit?
    • K
      Kevin SnyderSep 8, 2025
      The brakes were not detected, which prevents the system from shutting down the vehicle.
  • M
    Matthew AbbottSep 12, 2025
    What to do if my Directed Remote Starter shows CAN1 not detected?
    • X
      xadamsSep 12, 2025
      If your Directed Remote Starter shows a 'CAN1 not detected' error, check the connections of the CAN1 Tan and Tan/Black wires. Try waking up the data bus by turning the ignition on and attempting the process again. If the installation doesn't need this connection, you can skip the step by pressing the programming button 5 times.
  • A
    Allison TylerSep 23, 2025
    What does it mean if Directed Automobile Accessories runsafe was not disabled?
    • T
      Terry ArroyoSep 23, 2025
      No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.

Directed DIRECTWIRE DIRECTECHS 933.TL14 Specifications

General IconGeneral
BrandDirected
ModelDIRECTWIRE DIRECTECHS 933.TL14
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals