Locks
51
Locking or Unlocking the Front Panel
LOCKING OR UNLOCKING THE FRONT PANEL
This lock keeps people from using the front-panel buttons on your receiver unless they
enter the correct password, but it does not lock the remote-control buttons. This option is
only available on the TV1 menus; you should use the TV1 remote control for this task.
1 Press the MENU button and then select Locks.
2 If the receiver is locked, enter the password using the remote control’s NUMBER PAD.
The receiver displays stars (*) as you enter the digits of the password. Then select OK.
3 Select Front Panel Lock to lock or unlock the front panel of your receiver.
4 Select Yes. To activate the Front Panel Lock, you also must lock the receiver itself—make
sure that the receiver is locked, as described on page 45.
To Next Page
Loading...
