102
Using Caller ID
Chapter 11
USING CALLER ID
Caller ID displays on your TV if you subscribe to Caller ID from your local phone company.
To use this feature, make sure you have a phone line connected to the receiver, Caller ID
is enabled on your phone line, and that the Caller ID option is selected on your receiver.
Setting Up Caller ID Display
Use these instructions to enable or disable the Caller ID feature on your receiver.
1 Press MENU and select System Setup. Select Installation and then Caller ID.
2 Select Enable Caller ID or Disable Caller ID.
3 Select Done.
Caller ID Screens
When you receive a call, you will see a Caller ID pop-up screen.
You can select OK to eliminate the message. If you do nothing, the message will
disappear after about 20 seconds.
If you are using a menu screen when a call comes in, you will see a different Caller ID
pop-up screen. You can select OK to eliminate the message.
1
MENU
System Setup
Installation
1
Caller ID
2
6
To Next Page
Loading...
Need help?
General
