EC-BOS-9 Install and Startup Guide Chapter 3 Platform services and administration
Step 3 Click one of the buttons.
Included in this view are commands and related windows in which you can:
• Set the date and time in the controller.
• Change the HTTP port used by the controller for the platform daemon (platform server). The de-
fault port is 3011.
• Change TLS settings used by the controller for secure platformssl access, including configured
state, platformssl port (HTTPS Port), PKI certificate, and TLS protocol. The default port is 5011.
Refer to the Station Security Guide for complete details.
• Enable or disable SFTP (Secure File Transfer Protocol) and SSH (Secure Shell) access to the
EC-BOS controller. By default, such access is disabled, where both protocols use TCP port 22.
CAUTION: Although SFTP and SSH are more secure than FTP and Telnet access, enabling still
poses security risks. We strongly recommend you keep this access disabled, unless otherwise di-
rected by Systems Engineering. Upon completion of any use, such access should be disabled
once again.
• View daemon output and change logging levels.
• Enable debug access for temporary browser access to platform daemon diagnostic tools
• Perform other platform tasks initially performed with the Commissioning Wizard, such modifying
platform admin users (User Accounts), configuring runtime profiles, and so on.
The EC-Net 4 Platform Guide documents each object.
Step 4 What to do next depends on the object you selected.
August 14, 2023 35
To Next Page
Loading...
