Controls - 30 C16x/C24x/C30x Operator’s Manual
C24x Engine Controls
2. Choke control To close choke valve, pull
choke control.
Close valve to enrich air/fuel mixture
and help start cold engine.
Open choke valve after engine runs
for a few seconds.
3. Ignition switch To start engine, turn key all
the way clockwise. Release
key as engine starts.
To stop engine, turn key
counterclockwise.
4. Oil alert Indicator Lights when oil level is too
low. Engine will not start.
Check oil level. Add oil as needed.
5. Hourmeter Displays number of hours
engine has operated.
Item Description Notes
To Next Page
Loading...
Need help?
General
