C16x/C24x/C30x Operator’s Manual Service - 85
Each Use
Each Use
Check Engine Oil Level
C16x: Briggs & Stratton
®
Vanguard
TM
16 HP
Check engine oil before each use.
1. Check engine oil at dipstick (1).
2. If low, add GEO at oil fill (2) until oil level is at
FULL mark on dipstick.
Location Task Notes
Engine Check engine oil level GEO
Check air filter elements
Trencher Check hydraulic fluid level THF
Check hydraulic fluid cooler
Check hydraulic hoses
Check lug nut torque 65 ft•lb (88 N•m)
Check parking pin
IMPORTANT: For more information on engine
oil, see “Recommended Lubricants/Service
Key” on page 83 or see engine manual.