C16x/C24x/C30x Operator’s Manual Drive - 43
Shut Down
Shut Down
1. Release speed/direction controls.
2. Push boom control to lower digging boom, if
space allows.
3. Insert parking pin in the correct parking
hole (2).
4. Run engine at low throttle for three minutes to
cool.
5. Turn ignition switch to OFF position.
6. If present, close fuel shut-off valve.
7. Remove key.
8. If you park machine on a slope: block tracks with wooden blocks and engage parking pin.
IMPORTANT: The stopping position of
the gear (3) determines the correct
parking hole.
To Next Page
Loading...
