C16x/C24x/C30x Operator’s Manual Service - 95
100 Hour Service
100 Hour Service
Change Engine Oil and Filter
C24x: Honda
®
GX690
Change engine oil after the first 10 hours of
operation and every 100 hours thereafter.
1. Drain at plug (1) while oil is still warm.
2. Replace plug.
3. Change spin-on oil filter (3).
4. Slowly add GEO at fill (2).
C30x: Briggs & Stratton
®
Vanguard
TM
31 HP
Change engine oil after the first 10 hours of
operation and every 100 hours thereafter.
1. Drain at plug (1) while oil is still warm.
2. Replace plug.
3. Change oil filter (3).
4. Slowly add GEO at fill cap (2) until level rises
to FULL mark on dipstick.
5. Tighten fill cap.
Location Task Notes
Engine Change engine oil and filter Honda GX690, Vanguard
31HP, GEO
Change air filter elements
Check spark plug
NOTICE: Engine oil capacity is 1.8 qt (1.7 L).
Too much oil will damage the engine.
• Do not overfill.
NOTICE: Engine oil capacity is 78 oz (2.3 L).
Too much oil will damage the engine.
• Do not overfill.