C16x/C24x/C30x Operator’s Manual Overview - 3
Intended Use
Intended Use
The C16x, C24x and C30x pedestrian trenchers are designed to install buried cable and pipe. The
maximum trenching depth is 36” (915 mm) for C16x and C24x and 48” (1220 mm) for C30x. The maximum
trenching width is 6” (200 mm). These units are intended for operation in ambient temperatures from 20° to
115°F (-7° to 46°C). Use in any other way is considered contrary to the intended use.
C16x, C24x and C30x units should be used with genuine Ditch Witch
®
chain, teeth, and sprockets. They
should be operated, serviced, and repaired only by persons familiar with their particular characteristics and
acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
To Next Page
Loading...
