Drill - 68 C16x/C24x/C30x Operator’s Manual
Operate
4. Have helper lightly hold attached rod section and drill string so that they are aligned.
5. Move unit forward slowly. As soon as attached rod section engages drill string, have helper move
hands clear.
6. Slightly move forward until slip latch connection is correctly latched.
Pinch point. Crushing will cause serious injury.
To help avoid injury:
• Keep hands at least 6” (15 cm) from ends of rod section and drill string.
• Support rods from underneath with open palms. Do not grip rods.
To Next Page
Loading...
Need help?
General
