C16x/C24x/C30x Operator’s Manual Service - 89
Each Use
Check Hydraulic Hoses
Check hydraulic hoses for leaks and hydraulic connections for tightness before each use and every 10
hours. Replace any damaged part.
To replace parts from the hydraulic system:
1. Turn engine off.
2. To release pressure, operate all controls.
3. If there is a raised component, lower, block or
support with a hoist.
4. Cover connection with heavy cloth.
5. To release remaining pressure, loosen
connector nut slightly.
6. Use appropriate container to collect all fluid.
7. Replace the damaged part.
8. Reconnect to the correct torque.
Fluid under pressure can pierce skin and cause death or
serious injury.
To help avoid injury:
• Do not use hands to search for leaks. Use a piece of cardboard or wood.
• Wear the necessary personal protective equipment, including gloves and safety glasses.
If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
To Next Page
Loading...
Need help?
General
