Service - 120 JT5 Operator’s Manual
Service Precautions
CMW
®
Service Precautions
Welding Precaution
Washing Precaution
Read operator’s manual. Know how to use all controls.
Your safety is at stake. 273-475.
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
NOTICE: Welding can damage electronics.
• Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch with
engine running, or alternator and other electronic devices may be damaged.
• Connect welder ground clamp close to welding point and make sure no electronic components or
bearings are in the ground path.
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.
To Next Page
Loading...
