JT5 Operator’s Manual Systems and Equipment - 87
Anchor System
CMW
®
Anchor System
Crushing weight. If load falls or moves, it could kill or
crush you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Stand on operator platform.
• Drive anchor properly before drilling.
• Wear high-top protective boots with legs of pants completely tucked inside.
• Wear protective gloves.
• If you are not driving anchor to full depth, drive optional ground rod into soil away from drilling unit
and connect ground rod to drilling unit.
Turning shaft can kill you or crush arm or leg. Stay away.
To Next Page
Loading...
