Transport - 64 JT5 Operator’s Manual
Haul
CMW
®
Unload
1. Lower ramps.
2. Remove tiedowns.
3. Start drilling unit engine.
4. Raise stabilizer and drill frame.
5. Slow engine to low throttle and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Load and unload trailer on level ground.
• Ensure trailer wheels are blocked.
• Attach trailer to vehicle before loading or unloading.
To Next Page
Loading...
Need help?
General
