Operation Overview - 40 JT5 Operator’s Manual
Leaving Jobsite
CMW
®
Leaving Jobsite
1. Remove downhole tools. See page 83.
2. Remove anchors. See page 88.
3. Rinse unit and downhole tools. See page 116.
4. Disassemble strike system and disconnect from fluid system. See page 117.
5. Stow tools. See page 117.
6. Load unit onto trailer. See page 62.
Storing Equipment
1. For cold weather storage, antifreeze drilling unit. See page 114.
2. For long-term storage, disconnect battery disconnect switch.
To Next Page
Loading...
