Service - 122 JT5 Operator’s Manual
Recommended Lubricants/Service Key
CMW
®
Recommended Lubricants/Service Key
Proper lubrication and maintenance protects Ditch Witch
®
equipment from damage and failure. Service
intervals listed are for minimum requirements. In extreme conditions, service machine more frequently.
Use only genuine Ditch Witch parts, filters, approved lubricants, TJC, and approved coolants to maintain
warranty. Fill to capacities listed in “Specifications” on page 145.
For more information on engine lubrication and maintenance, see your engine manual.
Item Description
DEO Diesel engine oil meeting or exceeding CH-4 per the API service classification or E5 per
the European Automobile Manufacturer’s Association (ACEA) and SAE viscosity
recommended by engine manufacturer (SAE 10W30)
EO Engine oil (SAE 10W30)
MPG Multipurpose grease. Use polyurea based NLGI GC-LB Grade 1.5 or lithium based NLGI
GC-LB Grade 2.
MPL Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
DEAC Diesel engine antifreeze/coolant meeting ASTM D5345 (prediluted) or D4985
(concentrate)
THF
Tractor hydraulic fluid, similar to Phillips 66
®
HG, Mobilfluid
®
423, Chevron
®
Tractor
Hydraulic Fluid, Texaco
®
TDH Oil, or equivalent
TJC
Tool joint compound: Ditch Witch
®
standard (p/n 259-858) or
summer grade (p/n 256-031)
Check level of fluid or lubricant Check condition
Filter Change, replace, adjust, service or
test
IMPORTANT: Use the “Service Record” on page 153 to record all required service to your machine.
To Next Page
Loading...
Need help?
General
