JT5 Operator’s Manual Controls - 27
Operator’s Station
CMW
®
2. Hourmeter Displays engine operating
time.
Use engine operating times to
schedule service.
3. Cold start wait indicator Lights when intake air pre-
heater (glow plug) is
operating.
Wait until light goes off before
starting engine.
See “Start Unit” on page 58.
4. Engine oil pressure
indicator
Lights when oil pressure is
too low. Light will come on
briefly when engine is started.
If light remains on:
• Stop engine.
• Check oil level.
• Check for leaks before starting
engine.
• If pressure is still low, consult
engine manual.
5. Engine temperature
indicator
Lights when engine
temperature is too high.
If light remains on:
• Stop engine and let it cool.
• Check fan belt tension.
• Check for low engine oil level.
• Check cooling fins for dirt and
debris.
Item Description Notes
To Next Page
Loading...
Need help?
General
