Controls - 36 JT5 Operator’s Manual
ESID
CMW
®
6. OK indicator Green light means system
self test detected no
problems.
Strike system is ready to
operate.
7. Electrical power supply
indicator
Green light means control
box has sufficient electrical
power for operation.
Strike system is ready to
operate if OK indicator is also
on.
8. Self test button To start manual self test,
press.
To reset system after a strike
has been detected, press.
Checks all systems and circuits.
NOTICE: See “If an Electric Line is
Damaged” on page 18.
Item Description Notes
To Next Page
Loading...
Need help?
General
