Trench - 100 RT45 Operator’s Manual
Finish Job
11. Operate engine at full throttle when working.
Finish Job
1. When trench is complete, move ground drive hand control to neutral.
2. Adjust throttle to low.
3. Raise boom.
4. As boom clears top of trench, move attachment speed/direction control to neutral.
5. If equipped with traversing trencher, return trencher to center position.
6. Raise trench cleaner, if equipped.
7. Drive a short distance away from work site.
8. Shut down tractor. See page 75 for proper shutdown procedures.
9. Return trench cleaner to the stowed position, if equipped.
NOTICE:
• Do not make sharp turns. Lower boom to full depth when turning.
• If an object becomes lodged in chain, move attachment speed/direction control to neutral
and raise boom slightly. Reverse chain direction. If object must be removed manually, turn
engine off and set parking brake.
To Next Page
Loading...
