Specifications - 198 RT45 Operator’s Manual
H342 Saw
H342 Saw
*Lift capacities are for a stationary machine supported by stabilizers.
Dimensions U.S. Metric
A Trench depth, maximum 18 in 455 mm
A2 Angle of approach 18° 18°
A3 Angle of departure 14° 14°
D Transport height, attachment 79 in 2.0 m
L2 Overall length, full depth 177 in 4.5 m
L2’ Overall length, transport 162 in 4.1 m
Operation U.S. Metric
Breakover angle at full depth, maximum 38° 38°
Wheelshaft height, full depth 16 in 410 mm
Wheelshaft overhang from rear axle, full depth 54 in 1.4 m
Attachment height, full depth 54 in 1.4 m
Operating height, power unit 86 in 2.2 m
Not Shown U.S. Metric
To Next Page
Loading...
