Service - 148 RT45 Operator’s Manual
10 Hour
10 Hour
Location Task Notes
TRACTOR Check engine oil level DEO
Check hydraulic fluid level and reservoir breather cap THF
Check coolant level DEAC
Check oil cooler/radiator
Check hydraulic hoses
Check inflatable tire pressure and lugnuts (if equipped) 20-30 psi (1.4-2.1 bar)
95 ft•lb (129 N•m)
Check solid rubber tire mounting bolts (if equipped) 350 ft•lb (475 N•m)
TRENCHER Lube trencher tail roller MPG
Lube trencher pivot MPG
Lube trencher pivot stub MPG
Lube trencher auger bearings MPG
Lube auger sleeve MPG
Check attachment mounting bolts 200 ft•lb (271 N•m)
Check digging chain
Check digging chain tension 1.5-2.0" (40-50 mm)
COMBO Complete all service items for trencher and plow
PLOW Clean feed tube
Check plow arm pins and bushings
Check attachment mounting bolts 200 ft•lb (271 N•m)
Check plow vibrator oil MPL
SAW Clean saw
Check attachment mounting bolts 200 ft•lb (271 N•m)
Check bits
MICRO-
TRENCHER
Inspect slide plates on traverse frame
Inspect deflectors
Check vacuum hoses
Check attachment mounting bolts 200 ft•lb (271 N•m)
To Next Page
Loading...
Need help?
General
