RT45 Operator’s Manual Plow - 109
Operate
Operate
1. If equipped with combo, ensure that the trench/plow switch is in the plow position.
2. Move ground drive hand control forward to plowing speed and lower plow blade into ground.
3. Increase engine speed to full throttle.
4. Move attachment speed/direction control forward to start plow vibration. PLOW WILL VIBRATE.
5. Reduce attachment speed to a point with the least tractor vibration and the highest ground drive speed
possible without track slippage. Adjust vibrator speed if ROPS vibrates excessively.
6. Check cable for damage during plowing.
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away.
Electric shock will cause death or serious injury. Stay
away.
274-049
To help avoid injury: Expose lines by hand before digging. Cutting high voltage cable can cause
electrocution
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
NOTICE: Do not drive in reverse with plow blade in the ground.
NOTICE: Do not operate vibrator unless plow is in the ground.
To Next Page
Loading...
Need help?
General
