Ditch Witch RT45 - Leaving Jobsite; Microtrenching

Operation Overview - 64 RT45 Operator’s Manual
Microtrenching
Microtrenching
1. Start unit. See page 72.
2. Position tractor and controls. See page 124.
3. Begin trenching. See page 128.
4. Complete the installation. See page 131.
5. Backfill the trench. See page 140.
6. Shut down tractor. See page 75.
Leaving Jobsite
1. Backfill if necessary. See page 140.
2. Rinse equipment. See page 140.
3. Stow tools. See page 140.
4. Haul equipment away from jobsite. See page 83.