Microtrenching - 124 RT45 Operator’s Manual
Set Up
Set Up
1. Fasten and adjust seat belt.
2. Start tractor. See page 72 for start-up procedures.
3. Drive to starting point. Move in line with planned trench. See page 74 for correct driving procedures.
4. Lower backfill blade, if equipped.
5. Set parking brake.
6. Lower microtrencher to just above ground. See “Microtrencher Controls” on page 48 for information on
operating microtrencher.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away.
NOTICE: Use attachments or counterweights to make front and rear loads balance when all
attachments are raised. Contact your Ditch Witch
®
dealer about counterweighting for your equipment.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
To help avoid injury: Comply with all utility notification regulations before digging or drilling.
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
To Next Page
Loading...
Need help?
General
