RT45 Operator’s Manual Overview - 5
Operator Orientation
Operator Orientation
Right and left sides of machine are determined
by facing front of unit while seated at the
controls.
About This Manual
This manual contains information for the proper use of this machine. See Operation Overview for basic
operating procedures. Cross references such as “See page 50” will direct you to detailed procedures.
Bulleted Lists
Bulleted lists provide helpful or important information or contain procedures that do not have to be
performed in a specific order.
Numbered Lists
Numbered lists contain illustration callouts or list steps that must be performed in order.
1. Front of unit
2. Right of unit
3. Rear of unit
4. Left of unit
To Next Page
Loading...
Need help?
General
