Backhoe - 92 RT45 Operator’s Manual
Finish Job
Finish Job
1. Raise stabilizers to fully engage latch.
2. Return remote throttle to low.
3. Lift boom while keeping dipper pointed at
ground (shown).
4. Curl bucket closed and move dipper fully
toward boom (shown).
5. Lift boom to highest position and engage
stow lock.
6. Lower boom slightly to engage lock.
IMPORTANT: For tractor to function
once operator has returned to
operator station, stabilizers must be
raised, remote throttle must be set
at low, and boom must be stowed
and locked.
To Next Page
Loading...
