Backhoe - 88 RT45 Operator’s Manual
Set Up
Set Up
Position Tractor
1. Fasten and adjust seatbelt.
2. Start tractor. See page 72 for start-up procedures.
3. Drive to starting point. Move in line with planned job. See page 74 for driving procedures.
4. Ensure ground drive control is in neutral.
5. Move attachment speed/direction control to neutral position.
6. Lower rear attachment to 6” (150 mm) above ground.
7. Lower backfill blade, if equipped.
8. Decrease engine speed to low throttle.
9. Move to backhoe operator’s station.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away.
To help avoid injury: Use attachments or counterweights to make front and rear loads balance when all
attachments are raised. Contact your Ditch Witch
®
dealer about counterweighting for your equipment.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
To help avoid injury: Comply with all utility notification regulations before digging or drilling.
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
To Next Page
Loading...
