RT45 Operator’s Manual Service - 157
10 Hour
Check Plow Vibrator Oil Level
Check plow vibrator oil level every 10 hours. With
vibrator horizontal, oil should be halfway up sight
glass (2). Add MPL as needed at fill (1).
Saw
Clean Saw
Clean saw every 10 hours. Wash bolts and
mounting blocks with high-pressure water.
Check Saw Mounting Bolts
Check attachment mounting bolts every 10 hours.
Tighten to 200 ft•lb (271 N•m).
Hot parts may cause burns. Do not touch until
cool.
To Next Page
Loading...
