Transport - 84 RT45 Operator’s Manual
Haul
Load
1. Fasten and adjust seat belt.
2. Start tractor. See page 72 for proper start-up procedures.
3. Raise attachments, but keep them low.
4. Move attachments to center position.
5. Release parking brake.
6. Slowly drive tractor onto trailer.
7. Position tractor on trailer deck for proper weight distribution.
8. Set parking brake.
9. Lower attachments to trailer bed and turn tractor off. See page 75 for proper shutdown procedures.
10. Attach chains to tractor and attachments where tiedown decals are located. See page 82.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Block trailer wheels.
Rollover possible. If machine rolls over, you could be
thrown from seat and killed or crushed. Wear seat belt.
275-303
To Next Page
Loading...
Need help?
General
