EasyManua.ls Logo

DivioTec TBR922 - Configurations - LPR Mode

DivioTec TBR922
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Chapter 2: Camera Configuration
Exposure Cont. (LPR Mode)
Configurations - LPR Mode
Max Car Speed
Specify the car speed in the textbox or set it from 0 to 100 using the scrollbar.
The speed unit is kilometers per hour.
Max Sens Up Gain
Specifies the maximum gain when operating in LPR mode, the range is 1 ~
512, with 1 being the lowest gain.
Auto Day/Night Switch
Enables or disables automatic day and night switching. Could be adjust
based on the illumination of the surrounding.
External IR LED Switch
Enables or disables the external IR illuminator (if installed). If no external IR
illuminator is installed, this function will not be activated.
Two Value Converter
Check this option to enhance the contrast of the numbers on license plates.
Enter the value in the threshold textbox or adjust it from 1 to 255 using the
scrollbar.
Defog
Enable this function to remove fog or moisture. The available options are
OFF, Low, Medium and High.
IR Max Power
Configures the power of IR, the range is 0~100, with 0 being OFF and 100
being ON at full power.

Table of Contents

Related product manuals