19
⚫ There is a circulating function to increase/decrease the speed values. Rotate
the parameter key clockwise to change settings from small → large →
maximum → minimum. Rotate the parameter key anti-clockwise to change
settings from large → small → minimum → maximum.
（2）Set the time
⚫ Press key , time value flashes in the time setting mode.
⚫ Rotate the parameter key to set running time from 10 seconds to 99 minutes.
⚫ When time displays HD, this is a continuous running mode.
（3）Set acceleration and deceleration
⚫ Press key , acceleration value flash, press the again, the value will
increasing. the value will change from 1 to 9, then from 9 to1. 1 acceleration:
the slowest acceleration; 9acceleration: the fastest acceleration.
⚫ Press key , deceleration value flash, press the again, the value will
increasing. the value will change from 0 to 9, then from 9 to 0. 0 deceleration:
free braking;
1deceleration: the slowest deceleration; 9deceleration: the fastest deceleration.
(4) Set program
There are1～9 program groups.
To Next Page
Loading...
