revision: 1
FlexxPump 125 B
User Manual
11
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
3.2 Nameplate and designation
The nameplate of the FlexxPump 125 B is visibly attached to the side of the pump
itself. There the CE mark and the serial number of the FlexxPump 125 B are visible.
Refer to chapter 3, Fig. 1 for the location of the nameplate and serial number.
3.3 Scope of delivery
The FlexxPump 125 B is available in several different versions. They differ in the
number of accessories supplied.
All versions of the FlexxPump 125 B are prelled with a neutral, food-grade (H1)
lubricant (approx. 3 cm³), which can be mixed with the lubricants approved by DLS
Schmiersysteme GmbH, to simplify the initial commissioning. The manufacturer's
designation is F02.
Further data and documentation on the lubricant F02 are available on request from
DLS Schmiersysteme GmbH or at www.dls-schmiersysteme.de.
To Next Page
Loading...
