DLS FlexxPump 125 B - Maintenance and Disposal; Maintenance Schedule

revision: 1
FlexxPump 125 B
User Manual
42
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
 Before starting any maintenance work, inform yourself about the general safety
instructions (see Chapter 2) and observe the relevant local and operational safety
regulations.
 Do not deactivate any protective device without authorization!
The following maintenance schedule must be observed for the FlexxPump 125 B:
Maintenace Commissioning
After 500
hours or after
3 months
Every
year
If required
Cleaning x x x x*
Visual check x x x x*
Battery change x** x*** x*
Cartridge change x** x*** x*
* Depending on operating conditions and lubricant consumption
** Depending on delivery status (ordered version)
*** Recommendation after 2 years at the latest
LCD Name Description Remedy
Error
E4
Fatal error
Disassemble the FlexxPump
125 B and return it to the
manufacturer together with
the lubricant cartridge and a
description of the fault.
A fatal error usually occurs
in the electronics of the
FlexxPump 125 B and cannot
be repaired by you on site.
The address of the
manufacturer can be found in
chapter I.II.
E4
7. Maintenance and disposal
7.1 Maintenance schedule