DLS FlexxPump 125 B - Page 15

revision: 1
FlexxPump 125 B
User Manual
15
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
3. Remove the protective cap from the
bottom of the FlexxPump 125 B.
 Unscrew the yellow protective cap
counterclockwise from the bottom of the
lubricant outlet of the FlexxPump 125 B.
4. Inserting the battery
 Extract the battery cable from the battery
compartment.
 Connect the battery to the battery cable
using the plug.
 Store the battery and the battery cable in
the battery compartment.
 Make sure that the battery cable or
plug does not protrude from the battery
compartment.