DOD Technologies, INC • 675 Industrial Dr. Bldg. A • Cary, IL 60013 • Phone (815) 788-5200 • Fax (815) 788-5300
If the cotton end of the swab does not work the flat wooden end can also be used (see images below).
Do not use anything metal or sharp to as this may damage or scratch the fiber or optic lens.
After the cleaning is complete re-install the optic block, Chemlogic cassette, and close the gate. Power
cycle the analyzer by carefully disconnecting the green power connector on the back of the analyzer and
re-connecting (see image below).
To Next Page
Loading...