MAINTENANCE AND FAULT FINDING
EPT031055 Issue 2 September 2017 5-5
GENERAL CLEANING
The outer surfaces may be cleaned with a damp cloth and a mild cleaning
agent only. No humidity must get into the system.
SERVICE: REPLACEMENT OF
COMPONENTS
Applications without Shutter
Applications with Shutter
WARNING: The laser marking system and the
connected installation must be switched
off with the mains supply to the laser
marking system disconnected.
Maximum cycles of E-Stop Relay PNOZ S4
(opening of guard door when laser is printing)
15 Million
Maximum cycles of E-Stop Relay PNOZ S4
(opening of guard door when laser is not printing)
100 Million
Maximum cycles of Shutter 10 Million
To Next Page
Loading...
