STATUS ANNUNCIATORS
The Model 4200 provides 5 additional status annunciators during normal weighing
operations.
"MOT" Indicates that the indicator is in the motion state. This means that there is
movement on the platform. The movement must settle before a stable state
is achieved and is indicated when the "MOT" annunciator is disabled. Any
function that is related to stability (i.e. a print request, autoprint, etc.) will be
initiated upon stability and the display of stability.
"ZERO" Indicates when the displayed weight value is within +/- 0.25 scale divisions of
zero. When outside of the band, the annunciator will be disabled.
"NET" Indicates that the indicator is in the net display mode of operation.
"GROSS" Indicates that the indicator is in the gross display mode of operation.
"NEG" Indicates a negative weight when the indicator is in the lb-oz display mode.
CHECKWEIGH INDICATORS
UNDER Indicates that the weight on the scale is below the acceptable weight
tolerance.
ACCEPT Weight is within acceptable weight tolerance.
OVER Weight is over acceptable weight tolerance.
Section 3 Display and Keyboard
10
To Next Page
Loading...
