Doran 4200 - Technical Specifications

TECHNICAL SPECIFICATIONS
Display: 6-digit red LED, 0.43" high
8 red LED bar type annunciators 0.2"x0.4"
3 bargraph areas for OVER, ACCEPT, UNDER 0.35"x0.75"
Front Panel: Flat membrane touch panel; 0.010" polycarbonate laminated
over electrical grade polyester. Deposited silver ink contacts
on switches; cross linked acrylic adhesive.
Load Cell Excitation:10 VDC Fixed, 240 ma max. (8 x 350 ohm load cells)
(+EXC = +5vdc, -EXC = -5vdc)
Analog Input Range: 1 mV/V nominal
Analog Sensitivity: 0.6 uV/grad minimum
Internal Update Rate: 512 updates/second typical
Displayed Update Rate: Up to 20 updates/second
Resolution: 1:104,000 internal
1:3000 displayed (standard)
1:6000 displayed (precision)
1:10000 displayed (super precision)
Power (120 V operation): 120 VAC, 50/60 Hz, 0.1 A (typical)
100 VAC (minimum)
130 VAC (maximum)
Power (240 V operation): 240 VAC, 50/60 Hz, 0.05 A (typical)
200 VAC (minimum)
250 VAC (maximum)
Fuse (120 V operation): 0.250 amp, 250 V time-delay
Fuse (240 V operation): 0.125 amp, 250 V time-delay
Fuse is soldered into PCB and is not field replaceable without
tools.
Section 13 Technical Specs and Options
84