5DORMA
Important Installation Instructions
ALL INSTALLATIONS AND SERVICE SHOULD ONLY BE PERFORMED BY TRAINED OR AU-
THORIZED PERSONS
Warning - To reduce the risk of injury or death:
1. Carefully Read And Follow All Installation Instructions.
2. This unit should only be installed in a rough opening capable of providing proper structural
support.
3.
Always disconnect the power supply before servicing.
4.
To install and adjust the door for proper and safe operation, the installer must carefully
read this instruction book before proceeding, then follow the instructions exactly.
5.
The door is designed to be installed only by trained and knowledgeable installers.
The installation technician should be experienced in the installation of automatic
entrances. They should know all local code requirements and be familiar with the
requirements of the current ANSI A156.10 & 156.19 Standards for Power Operated
Pedestrian Doors.
6. After installation, the door must be adjusted to conform with DORMA recommendations
and all code requirements. Carefully study the requirements in these instructions.
7.
After installation and adjustment, the installers final responsibility is to properly
instruct the owner in the safe use of the door. He must also present the owner with this
manual.
8. Each step of the installation, adjustment and instructions are important for proper and safe
use of the door being installed. If there are any questions about any items contained in
these instructions, call the DORMA Technical Assistance Group for assistance.
9.
Save these instructions for future reference.
Compliance with Safety Standards
Your door system was designed to the latest operating and safety standards. In order to ensure
the continued safe operation of your door, it is important that:
•
Yourdoorsystembemaintainedincompliancewiththestandardsofthe
industry, BHMA/ANSI.
• Properdecalsandlabelsbeapplied,perBHMA/ANSIStandards,andmaintainedonyour
doors. If decals are removed, or cannot be read, request labels to be replaced when calling
for service.
Installation and Maintenance Manual
CS 80 MAGNEO
—
To Next Page
Loading...
Need help?
General
