DOTECH UIC-DX270 - Input;Output and Communication Interfaces; Digital Input and Output Signal Details

UIC-DX270 Series User’s Manual Rev 1.0
- 11 -
2. INPUT/OUTPUT FEATURE

1) DIGITAL INPUT SIGNAL
Pin Name Function Active state
J13.1 ID1 Over-load Main Motor fault (open)
J13.2 ID2 Reverse-Phase Main Motor fault (open)
J13.3 ID3 Low-Pressure Switch Signal fault (open)
J13.4 ID4 High-Pressure Switch Signal fault (open)
J13.5 ID5 Oil Level Switch Signal fault (open)
J13.6 IDCM1 Input common terminal 1
Pin Name Function Active state
J14.1 ID6 INT • Oil Flow Signal fault (open)
J14.2 ID7 Condenser Fan Fault Signal fault (open)
J14.3 ID8 Flow Signal-Pump(Fan) Interlock fault (open)
J14.4 ID9 Over-load Pump(Fan) Motor fault (open)
J14.5 ID10 Remote Start/Stop Control Run (closed)
J14.6 IDCM2 Input common terminal 2

