UIC-DX270 Series User’s Manual Rev 1.0
- 2 -
※ Certainly read 'warning matter for safety', and please use before using.
Warning matter for safety
This direction is for using the product correctly so that you could be safe from danger or incident.
Please carefully keep this all direction.
z Please use with being attached to a dual safety device in case of using for controlling instruments which could be
effective to human life or property (ex: controlling atomic energy, medical instruments, cars, trains, flights, burners,
amusement instruments or safety machinery).
z Please use with panel, there is a possibility getting an electric shock.
z Do not inspect or test with connecting power.
z Please connect after checking the terminal number when connecting power.
z Do not reorganize except mechanic from DOTECH.
z Do not use outdoor. It would be a cause making the product life shorter.
z When connecting wires, please give a good screw on terminal. There is a possibility causing a fire with bad connection.
z Please use in the proper performance zone. If you don’t, there is a possibility making the product life shorter or, causing a
fire accident.
z Do not use a load which is exceeded proper value of opening and shutting capacity of a relay contact. This will cause bad
insulation, bad contact and bad connection.
z When cleaning, water or liquid including oil are prohibited, only clean with soft and dried cloth.
z Do not use in the place where there is inflammability gas, explosiveness gas, moisture, a direct ray of light, radiation,
vibration and a shock.
z Please prevent from getting a dirt or leftover wire inside of this product.
z When connecting a sensor, please connect correctly after checking the polarity.
Some of the setting, size etc. on this manual could be changed without an advance notice.
To Next Page
Loading...