2 SiteSentinel
®
Integra™ ATG Console
Figure 2-1 System Console
The Integra 100 and 500 consoles are equipped with one (1) internal
relay. And while the Integra 100 has four (4) internal barrier positions,
this is optional with the Integra 500. The Integra 500 may be used
with up to 16 external output devices by utilizing up to four (4) OM4
relay modules. The Integra 500 may utilize a maximum of 60 barrier
positions total by installing an internal barrier and seven (7) VSmart
modules.
The Integra console can be operated via the integrated 15˝ (38.1 cm)
touch screen display, a local PC connection, or a remote PC
connection. To operate the console via a PC, an Internet browser
capable of rendering Flash 7.0 or higher is required.
Operation of the console via a local PC connection requires a
crossover Ethernet connection cable. To connect remotely via a local
or corporate LAN/WAN, the system’s IP address may be entered into
your Internet browser’s address bar. For remote connections via other
methods (or for a blank door unit), including VNC Viewer software,
consult an IT professional for assistance.
The ATG system supports up to 10 simultaneous browser sessions
in addition to one session via the integrated LCD touch screen.
2.1.1 Blank Door Unit (only for Integra 500)
For sites
choosing to
operate the
console via
remote
connections only, a Blank Door option with no touch screen exists.
An illuminated push button will be available on the front panel for
alarm notification and acknowledgement.
To Next Page
Loading...
