Dover OPW SiteSentinel Integra 100 - Vsmart Capabilies

Doc. #: M1800, Rev. 06
Page 29 of 101
www.opwglobal.com
4.4 VSmart Capabilies
Consult the following table for capabilities of the VSmart Module in
connection with various peripheral devices.
I.S. Barrier Capacity [up to two (2) I.S. Barriers per VSmart
Module, four (4) positions per Barrier]
Maximum per
Channel
Maximum per I.S.
Barrier
Sensors:
16
64
924B Probes:
4
16
AST (Flex) / UST
(924) / EECO*:
1
4
VLLD Sensors:
3
12
Connecting multiple peripheral devices to each channel of the VSmart
module is accomplished by making multi-drop connections (wired in
parallel). Each type of sensor or probe that is connected to a module
is detected via IntelliSense™ Technology.
*NOTE: 24V barrier is required for Flex and EECO probes.
For more information on the VSmart’s Multi-Drop Capabilities, use
the following QR Code to watch the instructional video. Or, the
instructional video can also be found at www.YouTube.com by
entering the search word “OPWGlobal”.