Dover OPW SiteSentinel Integra 100 - Model EECO Probes

Doc. #: M1800, Rev. 06
Page 74 of 101
www.opwglobal.com
Model EECO Probes
CAUTION: CANNOT BE MULTI-DROPPED ON
VSMART.
The Model EECO Probe is primarily used in
underground storage tanks for inventory and leak
detection. Two floats can be fitted to the probe shaft;
the product float sits on top of the product and the
water float (optional) sinks through the product and
sits on top of the water at the bottom of the tank.
EECO Probes
Probe Type:
Magnetostrictive with Floats
Probe Length:
From 4’ to 16’, in 6-inch increments
Material:
Stainless Steel Shaft
Level
Precision:
Accuracy:
± 0.0005” (.01 mm)
± .05% Full Scale or 0.006” (whichever is greater)
Temperature
Resolution:
Accuracy:
±0.02ºF (0.01º C)
±2.34ºF/ ±1.3ºC
(over a -40ºC to +70ºC / -40ºF to 158ºF)
Intrinsic Safety:
Hazardous Class I, Division 1, Group D
Temperature Detection
Measurement:
Methodology:
Range:
Five (5) equally spaced RTDs for volumetric
measurement
STANDARD: -4ºF to 158ºF (-20ºC to 70ºC)
X-TENDED TEMP: -40ºF to 158ºF (-40ºC to 70ºC)
I.S. Barrier:
24 V Barrier Part number 20-4345
Multi-Drop Restriction:
Requires one (1) I.S. barrier position per probe
EECO
Probe